Category: FAQ

5 Of The Most Common Plumbing Questions Answered


Plumbing is one sensitive area in people’s lives so naturally, there will be a lot of concerns and questions asked about it. Many people do not have any idea of the most basic issues concerning plumbing which puts them at risk of not knowing what to do in an emergency situation. It is good to get some knowledge about common plumbing issues since it will allow you to avoid common mistakes that may lead to huge plumbing disasters.

1. What Can Go Down The Garbage Disposal?

A lot of people literally throw anything and everything down the garbage disposal – which is wrong! Putting very hard materials such as bones and fibrous materials, such as corn cobs, will destroy your disposal by either completely jamming it up or making the blades blunt. You should only put soft foods and residue such as eggshells, small pieces of meat, corn seeds, and other cooked foods in the garbage disposal. It is better when you run water when your garbage disposal is on since it helps to get rid of the materials easily.

2. Why Is My Water Pressure Is Low?

This is a very typical problem facing a lot of homes. The problem could be in so many areas, but some of the most common ones include:

  • Clogged water pipes due to hard water residue
  • A problem with the on and off valve
  • Clogged showerheads

The best way to know if the problem is with the main water system or a problem in your home is to enquire from your neighbors. If their water pressure is normal, then you know the issue is in your home and you have to get a contractor to check it out.

3. What’s The Difference Between Hard And Soft Water

The difference is very distinct but can mostly be seen through your daily use of water. Hard water does not easily lather and may dry up your skin or cause you to itch. On the other hand, soft water lathers easily and is safe for all uses in and around the home.

Hard water also causes galvanized pipes to clog due to the residue that is deposited over time. This may lead to low pressure of water and in extreme cases, no water at all.


4. What Do I Do If There Is a Leak In The House?

The first, most important step, is to totally turn off the major valve that supplies water to the house. The next is to switch off the power if the leak is somewhere that may come into contact with electricity. Someone might be at risk of electrocution. Finally, call your plumber and electrician to correct the problem and certify that everything is up to standard.

5. How Do I Find The Best Plumber Near Me?

If you do not know any plumbers locally, the best way to start comparing online quotes for a new boiler or hire someone through referrals from neighbors. Always vet any recommendation you get carefully. Ensure that they are licensed and qualified to handle any plumbing work you need done. Never hire someone without checking out their credentials first.

Categories: FAQ

What Should I Do To Become a Plumber?


To become a plumber is a very good career choice. It is one of the most diverse and successful careers to engage in. There are many different branches that you can specialize in too. This includes bathroom installations, drainage systems, and even gas pipes installation and maintenance. The steps to becoming a plumber are very straightforward but you will need to work hard and be patient before you can be a qualified professional. Different states have different requirements, but the steps explained here are the general qualifications you’ll need.

Get Your High School Diploma

Many people think that since plumbing is in the informal sector, you do not need to graduate from high school. However, this couldn’t be further from the truth. Employers are always seeking highly qualified and well-educated individuals to hire.

One of the things they keenly look at is your score in math. You need to be well knowledgeable of all mathematical calculations to be a good plumber. Most employers and apprenticeships require that you submit your ACT results, where they check what you got in math. If you had passed well, you are more likely to be taken seriously than someone who didn’t perform well.


Vocational Training

You don’t need a college degree to be a plumber. However, you need to get into a technical or a community college and take specified courses. Depending on your location, the state will also indicate the number of hours that you are expected to put these courses.

Completing and doing well in these courses will further assist you to get into a good apprentice program. This plays a huge part in ensuring that you can become a professional plumber.

Plumber’s Apprenticeship Program

As much as getting classroom training is important, plumbing is a very practical career which makes apprenticeship programs very important. Different states have different base requirements as to who can enroll into these programs. It is mostly open to high school graduates between 17 and 18 years.

The programs are usually run by local plumbing associations and they are expected to run for between 4 and 5 years. You need to submit an application to your local apprenticeship program after which you must take a test to determine your eligibility for the program. It is important to note that competition is very high and you need to be at your best to get in.

Get Licensed. Become a Plumber

Most states do not allow plumbers who are not licensed to work. This is why getting a license is important. Take the state exams and pass before you apply for a license. Consider yourself a professional plumber once you pass.

Ensure that you get clarification from your local plumbing union about the qualifications you need to become a plumber in your state.

Categories: FAQ

What’s the Difference Between a Plumber and a Pipefitter?


There’s an age-old debate about the difference between a plumber and a pipefitter. Many people use the terms interchangeably, and they are often put into the same category in terms of career classification.

There’s absolutely no doubt that both of these occupations require skill and knowledge directly relating to measuring, cutting, and the correct connection of piping. However, within the trade, there are a number of differences, and it’s important to understand this difference so that you don’t end up getting the wrong professional to assist you with your problem at home.

Similarities Between The Two Professions

The main reason why the two professions are confused from time to time is that both have to do with the installation of pipes and fixtures. A basic requirement is also that both need to have knowledge of state and local building code and be comfortable with studying and interpreting blueprints.

Difference Between The Two Professions

plumbing-contractorThe main difference between a plumber and a pipefitter is the scale of the work that will be performed as well as the diverse skill set. A pipefitter’s work deals mainly with pipes made of special metals that can handle high pressure. The type of pipe will depend on the material that runs through it, including chemicals, gasses, and waste material. Plumbers, on the other hand, tend to work with more basic piping such as copper and PVC that handles the flow of water or waste disposal systems.

Pipefitters work on large-scale industrial sights, factories, and power plants. Plumbers mainly get call-outs to residential jobs, but also perform work on business premises.

Be Sure You Know The Difference

Before you call out the wrong professional to your premises, be sure you know the difference.

Always remember that plumbing is more to do with everything sanitary and your quality of life while keeping people healthy.  This includes water piping drain, waste and vent piping, steam and medical gas piping, the appurtenant fixtures and equipment. Plumbers will also work on roof drainage systems, smaller fuel gas piping, as well as smaller hydronic system piping.

Legally all plumbers must be registered. Apprentice plumbers must be at least registered.

Pipefitters usually work on larger gas projects. This includes steam and hydronic system piping as well as refrigeration piping. This also includes industrial piping, pipelines, as well as the equipment associated with these systems. Pipefitters have a high level of skill when it comes to welding and working from detailed drawings.

Categories: FAQ

How Much Will It Cost To Fix My Plumbing Pipes?


As a homeowner, you can expect to have some unexpected repair costs from time to time, especially if you have an older home and plumbing pipes. Most homeowners are also used to doing a little DIY plumbing from time to time. It might be a clogged drain or a leaky faucet. You might even install a new showerhead.

However, you might find yourself in a position from time to time when your plumbing pipe needs repair or replacement.  If you have any plumbing pipe damage, it’s essential to have it repaired or replaced immediately to prevent any further, more extensive, and costly damage from occurring.

When this happens, it might be a good idea to get hold of a licensed and experienced plumber. It’s also a good idea to compare some quotes so that you know what you’re getting into ahead of time.

Repair vs Replace

When it comes to plumbing pipes, there are many factors that can affect whether repair or replacement will be the best option. This will also affect the overall cost.  Questions that need to be answered include:

  1. Where is the leak coming from? Is it inside or outside?
  2. How many leaks are there?
  3. Is the leak from a plumbing problem or a structural problem?
  4. How complex will it be to access the problem?
  5. Will repair of surrounding areas be required?
  6. Is there any damage caused by the water leak?


If the leak is coming from under the flooring, in the ceiling, or in the drywall, you can expect your costs to increase with the extra expenses of repairing those areas once the plumbing pipe repair is complete.

Finding the leak is often the easiest part. However, finding exactly where it comes from might be slightly harder in some cases.

Signs that show you need repair

If your pipes have an active and obvious leak, you might require some basic plumbing point repair. The repair could involve the replacement of a small section of pipe that is actively leaking. Repair is less invasive and should cost less than total replacement.

Once you notice see water stains, spots, or puddles in areas that should be dry. Also, should your pipes not yet reach the end of their useful lives replacement may not be necessary?

Signs that show you need replacement

Replacement involves removing the entire pipe and replacing it with a new pipe, which will come at a higher cost. If your home is older than 60 years and you haven’t done any major plumbing, there’s a good chance that replacement will be your only option when a problem arises.

You might need replacement if your leak cannot easily be found. If your pipes are severely corroded, damaged, or past their useful lifespan, replacement may be your only option. Also, be sure to pay attention to the color of your bathwater. Discoloration may indicate that pipe replacement is necessary.

How Much Can I Expect To Pay?

There are simply too many factors to consider when it comes to repair or replacement to give an accurate cost breakdown.

plumbing-contractorHowever, average prices for repair can range from $150 – $250, depending on your location, and the difficulty of the repairs themselves.

When it comes to heat pump replacement costs see online at or for pipe replacement, you can expect your project to range anywhere from $400 on the low end to as much as $4000 for a larger, more complex replacement project.

The only way to get an accurate idea of the cost to repair or replace is to get hold of a local professional for a free assessment to get a radiator installed. You should also not settle for just one estimate. Comparing several quotes will give you a much better idea of the pricing trends in your area and also help you avoid scams and being overcharged.

Categories: FAQ Plumbing Costs